Special Feature: Talking Fire Inspections & Fire Safety with Chase Browning, Pt. 2

fire safety, hand pulling fire alarm

We’re back with more from Chase Browning! This time, we’re going to be discussing what to actually expect from fire inspections, as well as practical tips for fire safety and risk management. If you take Chase’s advice, you’ll be setting your business up for success, not just with the fire inspection itself, but with keeping people and your business safe.

So let’s get into the key elements of properly preparing for your fire inspection!

Setting Your Business Up For A Successful Fire Inspection

Just like with insurance policies, fire codes and fire prevention are based on real-world tragedies and the lessons learned from them. The professionals have learned from investigating how fires started, how a fuel package came in contact with an ignition source, and how do we keep that from happening again. 

So don’t scoff at advice like, “don’t run an extension cord too long,” or, “don’t trample all over it.” Because these things come from experience, and that advice is meant to keep you safe. 

And that’s where the following advice from Chase Browning comes from: experience, meant to keep you safe. 

The Most Common Violations

There are all kinds of violations that could pop up during an inspection, ranging from simple resolutions to major repairs and services. When asked about the most common violations, though, Chase had one resounding answer:

“…if we get one thing right in an inspection: make sure people can get out. Make sure exits are clear.”

Now, “make sure exits are clear,” actually has two meanings here:

  1. Make sure there is nothing blocking the exit that would keep people from using it.
  2. Make sure people can find that exit to use it.

Even if it’s a totally usable exit, it’s pretty pointless if no one knows it’s there. Chase used the example of the Station Nightclub fire to explain how unclear or unknown exits can quickly become a tragedy.

The Station Nightclub in Rhode Island hosted a performance in 2003 where the pyrotechnics used for the show ignited polyurethane foam insulation in the walls and ceiling of the club. During the incident, 100 people lost their lives, and the final report determined that 95 of those fatalities were because they couldn’t evacuate because of an impassable egress.

The reality is, everyone was trying to run back to the entrance to escape. The entrance was a narrow corridor next to the ticket booth and had two doors you had to go through to get outside. However, the club actually had four exits that could have been used. Chase uses the term “occupant characteristic,” or the expected behavior of people occupying the space, to describe the tendency for people to try to escape the way they came in.

So, making sure your exits are visible and known, and that they aren’t being blocked by Christmas decorations or boxes, takes the number one spot.

Some other common violations include:

  • Overloading Circuits: always make sure your use of electrical outlets matches their outputs. Especially in older buildings where the electrical work probably needs updating anyway.
  • Ignition Source Near Fuel: Sorry folks, you can’t keep your portable heater right next to the trash can under your desk.
  • Mediocre Housekeeping: It always comes down to fuel and ignition sources, and having things piled up next to wall outlets, or cords running through high-traffic walkways are just asking for trouble.

And then there is a common situation that could become an obscure violation, and it has to do with “change of use” or “change of occupancy.” This is the kind of situation where a building either gets a completely new group of people moving into it, like a roller rink closing and the building becoming a church, or something that, on paper, might not seem like a change, but actually is.

Chase’s example is a warehouse full of mayonnaise jars. If the warehouse has been perfectly in compliance storing glass mayonnaise jars for decades, someone might not think twice about the operation switching to holding plastic mayonnaise jars. But, the reality is that it totally changes the fuel load, and could put the occupants at risk. Plastic burns, glass doesn’t. So, be cautious of how seemingly minor changes to your business could seriously change your risk factors.

smoke alarm, smoke, fire safety, fire inspection, test safety features

Maintenance Misconceptions

When we’re talking about fire prevention systems, or fire sprinkler systems, there are some general rules you have to follow:

  • Have inspections done on schedule
  • Make sure the sprinklers aren’t blocked
  • Make sure the valves are open
  • Make sure water flows

Pretty simple, right? There can be a bit of a learning curve, because you do have to be aware of the particulars of your specific system and its maintenance requirements, as well as the fire code requirements, and your insurance policy requirements, but generally those should mostly overlap.

However, there are things you might not even think of that could be “detrimental to sprinkler performance.” Chase warns that, if you’re remodeling, don’t paint over your fire sprinklers or protection systems. They respond to heat, and a fresh coat of paint may stop them from responding properly.

“Whether it’s smoke alarms, smoke detectors, sprinklers, whatever is in your commercial space, don’t assume that it’s going to be okay if you modify something without checking with a professional first.”

Do The Walk-Through

Now, what if you’re the proactive type who wants to get ahead of the inspection? Doing regular walk-throughs once a month or so is a great way to reduce risk and identify and remove potential hazards before a disaster. It can protect you from both the physical hazards and legal exposure, as well as making your official inspections a breeze.

Chase used to do consultations for these kinds of informal inspections to help business owners get out in front of their unique risk profiles and be able to pass their annual fire inspections. But, what does that actually look like? Well, Chase starts with a clear statement:

“Hey, keep it simple and let’s just look at things that are easily identifiable and easily remedied when observed at the right time.”

How do you keep it simple? Just walk around, starting outside and making your way in, and just ask yourself some questions:

  • – Is the address sign on the building visible? Has it been painted over, or obscured by vegetation? 
  • – Are the walkways in and out of the place free and clear of slip hazards?
  • – Are the walkways free and clear? 
  • – Is there lighting on the outside?
  • – Is it obscured or the light bulbs need to be changed out?
  • – Are there fire service features on the outside of the commercial property that need to be looked at?
  • – Are there parking fire lane areas? 
  • – Is there striping in the parking lot that’s been faded, or hasn’t been dealt with in years?

Once you move to the inside, you’re going to want to walk through everywhere the public might be. Especially areas where people who aren’t necessarily familiar with the space are going to be, like the path to the bathroom or going up and down stairs. As you move through these spaces, you’ll want to ask yourself:

  • – Are there things blocking the free movement within the stair area? 
  • – What would keep somebody from being able to move through this space relatively easily?
  • – Are exits clear and visible?
  • – Are the exit signs working?
  • – Have you tested the backup battery on your exit signs? What about their emergency lights? (Hint: there’s a little button on the sign that you push to test the backup battery.)

And, finally, look at your fire protection systems. Check your smoke alarms. Make sure the fire extinguishers are charged and ready in accessible locations. And double check that you’ve kept up on the periodic maintenance schedule of your fire sprinkler systems by a qualified professional.

While this might sound like a lot, in practice it can move really quickly. Chase says, “(it) can take about 15 to 30 minutes on a regular size occupancy. If you do that every quarter, you’re going to be really put in a good position. You have good habits built in.”

So, that’s it. 30 minutes spent wisely every three months, and you can get ahead of your inspections and the tragedies they’re designed to prevent. Pretty good return on investment, right?

fire sprinkler system, flames, fire safety system

Keep Your Records (and Know Where to Find Them!)

Fire departments and the fire code require that you keep a log of records on the premises for a specific period of time. Depending on what the record pertains to, how long you have to keep it could range from a couple of years to the life of the building. From Chase, he says, “a lot of that’s governed by the fine print in the fire code, the record retention laws issued by the secretary of state in Oregon, and any policy drivers like insurance, etc. that will impose a duty on an owner for such things.”

While Chase does say he’s a big fan of what’s been coming out from the codes and standards arena of trying to reduce barriers of retention by allowing people to keep electronic records instead of just a physical binder, they are seeing a new but similar issue with this come up.

The key to good record keeping and being compliant is that you have to be able to produce your records when requested. It used to be that people would lose their binders in the attic next to the Christmas ornaments or something. Now, with e-files, it’s a whole other level of “needle in a haystack” with generic file names.

Our tips for maintaining your electronic organization are:

  1. Keep everything inspection-related in a master folder.
  2. Always change file names for quick access, by using a “when-what it is-what was done” format
  3. Organize your master folder by field, like fire sprinkler service records should really have its own folder

By keeping it all organized ahead of the inspection, you’ll save yourself (and your inspector) a major headache and a lot of time.

What to Know About Evacuations

We’ve talked a lot about making sure people can move through a space safely, and that they can get out when they need to. Well, that brings us to our final topic: evacuations. The moment when people actually need to get out, and how to prepare for it.

Unfortunately, it’s not a simple topic. There are all kinds of different situations and scenarios that can affect best practices when it comes to evacuations and fire drills, but the professionals do try to make this as simple as possible. Simplicity in a moment of panic can save lives.

Often people think of evacuations in terms of school fire drills, or the evacuation notice we can get from a wildfire. Most structural evacuations really aren’t going to be very much like either of these examples, though. But, in the case of school fire drills, it gives us a fixed point to try and achieve: safe, orderly egress of everyone inside. But you’re probably not going to get everyone in your building to line up single file and walk out to the playground.

fire safety, fire inspection, exit sign, flames

So, how do we do our best to achieve a safe, orderly evacuation?

Well, based on the Oregon Fire Code, Chase says there are only a portion of commercial occupancies that have a requirement for staff training on evacuations, schools being the number one example. If we’re talking about hospitals, though, the staff needs to be aware of evacuation plans, but you can’t really run a fire drill by running actual patients outside on gurneys.

With other business models, like “transient lodging” such as hotels, motels, etc., the requirement is having a posted evacuation plan on the back of every door saying something like, “you are here, exit this way,” with a map. But, that’s not required in an apartment building because of what’s called “occupant familiarity,” meaning that the people who live there are expected to know the space and know how to get out.

In places, like businesses where occupant familiarity is not expected, we then have to prepare for occupant characteristics like we discussed in the station night club fire. In that case, posting clear exit plans and having exits open and clearly marked are the best things you can do for the public. Including evacuation training for your staff as a part of their general safety training can help to really avert disaster.

Like so many other things here, you might not be required to have an evacuation plan posted for your business by the fire code, but it might show up in your insurance policy. So be sure to check with both.

A Big Thank You to Chase Browning

That wraps this month’s special feature on fire inspections and fire safety. From all of us at Ashland Insurance, we would like to extend a tremendous thank you to Chase Browning for sitting down with us and answering all of our questions so thoroughly. 

For everyone reading along, we hope this has been enlightening and you can go into your next fire inspection confident that you are managing your risks fully. If you want to make sure that your business is in compliance with your insurance policy, you can always reach out to your agent and they will be happy to walk you through it.

You can reach out to our team at Ashland Insurance online or give us a call!

541.482.0831 Ashland

541.857.0679 Medford